Sometimes, You are wearing your headphones and trying to enjoy your favorite song. However, the headphone only one side working. Playing with only one earphone can be frustrating, especially if listening to music or watching videos is a regular part of your day. If you’ve been relying on your favorite headphones and rhythms to block out noise while working, this issue will undoubtedly affect your productivity. To troubleshoot a headset that only works on one side, you must first determine whether the problem is software or hardware, and then apply the appropriate solution. Read this post to find out more!
Why is your Headphone only one side working?
There can be many reasons for this problem- headphone only one side working. However, four common causes of this problem, in our opinion, are as follows:
- The most common reason is that one side wire is broken and we ignore the problem.
-
The second reason could be a poor connection between the port and the jacks.
-
The third reason is that the headphones on that side are filthy.
-
The final issue is with the sound settings.
How to fix headphone only one side working at home?
Problems |
Causes |
Troubleshooting |
| One side wire is broken | So, how can you tell if the headset is broken or not? You can check by using different music playback devices to test the faulty headset; if one side of the headset still loses sound, it means that your headset has a broken internal cable.
If you wrap or tether your headset frequently, perhaps to slip it into your pocket, this could cause one or both of the headphones to stop working. Some startled phone users use the cord to eavesdrop on the device rather than gently pulling it out of the plastic base. This can result in faulty or disconnected headphone cords or bent headphone cord connections over time. To determine which part of the wire may be affected, you need to troubleshoot. |
– If the wire breaks, the solution is as follows: Wiring: Once you’ve located the broken headphone wire, connect it to the internal cable using solder joints. However, this is only a temporary solution because the weld is not durable, easily breaks during use, and reduces the sound quality of the headset. – For twisted wire:
|
| The weak contact between the port and jacks | Another issue is why headphone only one side working. The presence of debris in your headphone jack could be one of the reasons your earphones aren’t working properly. Do you know how you sometimes leave your phone unattended, and sometimes in dusty environments, in your pockets and bags? Well, debris can get into the headphone jack and prevent one or both ears from functioning properly.
We almost always toss them into our bags, pockets, or anywhere else, where they mix with other dust and grime that has been lying at the bottom since the beginning of time. Then, whenever we need them, we fish them out and shove them back into our ears without hesitation. |
– If you have a can of compressed air on hand, point the nozzle at the port and blow out the dirt with four sprays.
– Another option is to use a cotton swab (or cotton buds used for cleaning the ear). To use this option, make sure the buds are not fluffy so that some of the cottons do not get stuck in the earphone jacks. Once you’re certain the cotton swab fits perfectly into the hold, gently push it in until it touches the end and gradually spin it to brush all sides of the earphone jack. The dirt will fall out when you remove the jack. – Some people recommend using a cotton swab lightly dipped in alcohol. If you do this, make sure to squeeze out any excess moisture so it does not soak. It should be noted, however, that the earphone jack is made of metal and can be corroded by alcohol. As a result, unless absolutely necessary, you should avoid using this option. |
| Headphones are dirty on that side | Headphones can attract anything from lint to dust to ear wax. This is not only disgusting, but it could also explain why your headphones sound slightly muffled or quieter on one side. Take out your headphones or earphones and inspect the inside of the ear pads or the wire mesh of the earbuds right now. Because of our habits, months of clogged earwax, grease, and dust have become trapped in the tiny crevices of our headphones. Because it is dirty, we always shower and change our clothes after our gym sessions or morning runs. But when was the last time we cleaned our headphones, either before or after a workout? | Here are some steps to clean your headphone:
|
| Problem with the sound settings | As strange as it may sound, your device’s audio settings may be to blame if the mono option is enabled. To resolve this, go to your audio settings and disable it. This is the final reason for the problem:” Headphone only one side working”. | How to check the sound setting:
|
In conclusion, with the help of this blog, you now know how to fix your headphone only one side working. Follow the steps exactly and read the instructions thoroughly. It won’t be long before your headset starts working properly if you follow the instructions. You now know the answer to the question, “Why can I only hear through one headset?” You have the ability to solve the problem once and for all!
Read more:
